SR 011
DC Motor Output Stage
- DC motor output stage (+50 V DC/5 A)
- 1 incremental encoder input switchable RS422/TTL (max. 500 kHz)
- 2 enable inputs +24 V/3 mA/0.5 ms with STO function (not EG type tested)
- 1 digital output +24 V/0.5 A/short-circuit protected
- For controlling a DC brush motor
For the S-DIAS system, EPLAN Macros are available for simple integration into the control cabinet.
Technical data
Performance data
Supply voltage
+18-55 V DC
Current consumption
maximum 5 A
Digital inputs
Amount
2
Input voltage
+24 V DC (+18-30 V DC)
Type
Enable
Input current
3 mA at +24 V
Input delay
typically 0.5 ms
Digital outputs
Amount
1
Short-circuit proof
Yes
Max. permissible load current/channel
0.5 A
Output voltage
+24 V DC (+18-30 V DC)
Max. Output current
0.6 A
Supplies
Amount
1
Type
+24 V DC
Incremental encoder inputs
Amount
1
Input signals
Incremental encoder signals RS422 (A, /A, B, /B, R, /R)
RS422 signal (120 Ω termination)
Incremental encoder signal TTL (A, B, R)
TTL level (1200 Ω Pull-UP)
RS422 signal (120 Ω termination)
Incremental encoder signal TTL (A, B, R)
TTL level (1200 Ω Pull-UP)
Input frequency
6
Encoder supply
+5 V/0.2 A short-circuit proof
Braking resistors
Type
external power resistor
Output
GND switching
Max. Current
6 A
Mechanical properties
Width (mm)
12,5
Height (mm)
104
Depth (mm)
72
Protection type
IP20
Article number / Certification
Item number
20-029-011